Burst Pipe Water Damage Restoration
A burst pipe can release a lot of water into your home in a short period of time. Even after the water is shut off, moisture can continue spreading into drywall, flooring, cabinets, insulation, and other building materials.
Floors To Ceiling Restoration provides burst pipe water damage restoration throughout Dallas-Fort Worth, including water removal, moisture inspection, structural drying, and reconstruction when repairs are needed.
Fast Help After a Burst Pipe
Stopping the source of the water is the first priority. Once the plumbing issue has been addressed, the next step is determining how far the water traveled and which materials were affected.
Water from a burst or broken pipe can move beneath flooring, behind baseboards, into wall cavities, under cabinets, and into adjoining rooms. What appears to be a relatively small area of visible water may extend much farther than expected.
Our team evaluates the affected areas, removes standing water when necessary, checks for hidden moisture, and develops a drying plan based on the materials and areas involved.
Learn more about our Water Damage Restoration services.
Where Does Water Go After a Pipe Bursts?
Water follows the path of least resistance, which means damage is not always limited to the area directly surrounding the broken pipe.
Depending on the location and amount of water released, moisture may affect:
✔︎ Drywall and wall cavities
✔︎ Baseboards and trim
✔︎ Flooring and subflooring
✔︎ Cabinets and vanities
✔︎ Insulation
✔︎ Ceilings and rooms below the leak
✔︎ Closets and adjoining rooms
We use professional moisture-detection equipment to help identify areas that may not be visibly wet.
Learn more about our Structural Drying services.
Our Burst Pipe Water Damage Restoration Process
Inspect the Water Damage
We inspect the affected areas and use moisture detection equipment to determine how far the water has traveled.
Standing water is extracted when necessary so the drying process can begin as quickly as possible.
Set up Professional Drying Equipment
Commercial air movers and dehumidifiers are positioned based on the affected areas and materials.
Monitor the Drying Process
Moisture levels are checked during the drying process to determine when affected materials have reached appropriate drying conditions.
When reconstruction is necessary, we continue from water mitigation into the repairs and rebuild.
What May Need to Be Repaired?
The amount of reconstruction needed depends on where the pipe failed and how extensively the water spread.
✔︎ Drywall and insulation
✔︎ Baseboards, trim & door casings
✔︎ Hardwood & other flooring
✔︎ Subflooring
✔︎ Cabinets & vanities
✔︎ Interior paint & finishes
✔︎ Ceilings
✔︎ Other damaged building materials
Some homes require only limited repairs after drying. Others may need more extensive reconstruction, particularly when water has traveled through multiple rooms or levels of the home.
Because Floors To Ceiling Restoration handles both water damage mitigation and reconstruction, homeowners can work with one contractor from the initial water damage through the rebuild.
Burst Pipe Damage and Insurance Claims
Burst pipe water damage is often associated with homeowners insurance claims, although coverage depends on the policy and circumstances surrounding the loss.
When we are performing the restoration work, Floors To Ceiling Restoration can provide documentation related to the damage and services performed, including photos, moisture readings, drying documentation, estimates, and information about affected materials.
When need, we can also communicate with your insurance company or adjuster regarding our scope of work and restoration services.
Learn more about our Insurance Restoration & Rebuild Services.
From Water Mitigation Through Reconstruction
Drying the home is only part of the recovery process.
Once affected materials have been properly dried and damaged materials have been removed, the home may still need drywall, flooring, cabinetry, trim, paint, or other finishes restored.
Floors To Ceiling can handle both phases of the project.
Instead of coordinating one company for water mitigation and another contractor for the rebuild, our team can take the project from the initial water damage through reconstruction.
Learn more about our Reconstruction Services.
Burst Pipe Water Damage Throughout Dallas-Fort Worth
Floors To Ceiling Restoration is based in Frisco and provides water damage restoration throughout Dallas-Fort Worth.
Burst and broken pipes can occur for many reasons, including freezing temperatures, plumbing failures, deteriorated connections, accidental damage, and failures inside walls or ceilings.
We provide water damage restoration in communities including Frisco, Plano, McKinney, Allen, Prosper, Celina, Little Elm, The Colony, Lewisville, Flower Mound, Denton, and surrounding areas.
View All Service Areas.
Why Homeowners Choose Us for Burst Pipe Water Restoration
FAQs About Burst Pipe Water Damage
What should I do immediately after a pipe bursts?
If it is safe to do so, shut off the home's water supply or the supply to the affected plumbing fixture and contact a plumber if the pipe needs repair. If water is near electrical equipment, outlets, or other potential hazards, avoid the affected area until it is safe.
Once the source has been stopped, water removal and moisture inspection should begin as soon as possible.
Do I need professional drying if I cleaned up the visible water?
Possibly. Removing visible water does not necessarily mean the building materials underneath or surrounding the area are dry. Water can move beneath flooring, behind baseboards, into drywall, under cabinets, and inside wall cavities. Moisture readings can help determine whether additional drying is necessary.
How long does it take to dry a home after a burst pipe?
Drying time depends on the amount of water released, the materials affected, how far the moisture traveled, and how quickly drying began. Many water damage situations require several days of professional drying and monitoring, but every loss is different.
Can hardwood flooring be saved after a burst pipe?
Sometimes. The outcome depends on the flooring type, amount of water, length of exposure, installation method, and condition of the flooring. We evaluate the affected flooring and surrounding materials before determining whether drying may be appropriate or replacement is necessary.
Does homeowners’ insurance cover burst pipe water damage?
Homeowners' insurance may cover certain types of sudden and accidental water damage from a burst pipe, but coverage varies by policy and by the circumstances of the loss. Your insurance carrier determines whether a particular loss is covered.
Can you work with my insurance company?
Yes. When Floors To Ceiling Restoration is performing the restoration work, we can provide photos, moisture readings, drying documentation, estimates, and other information related to our work. We can also communicate with your insurance company or adjuster regarding our scope and restoration services.
Can you rebuild my home after the water damage is dry?
Yes. Floors To Ceiling Restoration provides reconstruction and rebuild services after water damage. Depending on the loss, this can include drywall, flooring, cabinetry, trim, paint, and other repairs needed to restore the affected areas.
Need Help After a Burst Pipe?
Whether you're dealing with a recent water loss or need help rebuilding after mitigation is complete, our team is ready to assess the damage, explain your options, and help restore your home.
Request a consultation below or call 469-446-9410 to get started.